Outstanding value and excellent service
Absolute hands down one of the best values / purchases I've made. Previously purchased the mount and have been nothing but impressed. Have recommended this to countless others.
Worked great!
Straightforward install, perfect fit for the Blum hinges. Stryker worked with me when I realized I'd ordered the piece for 15-series, and built a 10-series hinge mount for me instead. 10/10 product + service.
Awesome mount. This is designed for a long term mounting. The only thing I would add is a wing nut screws for a quick short term mounting, where I was 4x4 ing and wanted to remove the starlink to a camping situation and visa verse.
I attached this mount to the roof of my big rig cab using the magnet method. I reach speeds up to 75 mph at times, running on the rough roads of southern California and northern Arizona almost daily and haven't had any movement. Its aligned perfectly and works perfectly on my routes, specifically on US 93 between Phoenix and the NV-UT line at I-80 where the dish didn't work well using the windshield mount method. This mount is a must have for truckers and travelers.
Replaced original cords that were flimsy, and did not last
When mounted on a roof rack the Starlink is not visible.
This mount installed easily and is as advertised. I am very satisfied with the product. I would like to see one thing changed with the design, if possible. I would like the polycarbonate to be flush with the top of the rails. That would allow gear to slide over or be temporarily carried over the top of the antenna.
I purchased one for Starlink Gen3 antenna. Delivery was fast. It is very well designed and was easy to install on 4040 aluminum extrusion. I hope it lasts long without beeaking on my long and rough trip to Alaska next month.
This was everything I needed out of a star link roof mount at a fraction of the cost of most others on the market. Fit my Prinsu rack perfect and holds the dish secure, no worries about it flying off driving down the highway or on rough trails. 10/10 definitely recommend!
The Striker Mount for the Starlink Mini paired with the Low Profile Launch Pad is an absolute home run. The build quality is rock‑solid, the fitment is precise, and the whole setup feels purpose‑built for real overland use. Installation is clean and confidence‑inspiring, and once mounted, the Mini sits secure, streamlined, and completely out of the way. Performance is flawless — zero vibration, zero fuss, just reliable connectivity wherever you park. This is hands‑down one of the smartest upgrades you can make if you rely on Starlink in the field.
For the money I was expecting something better than a 3D printed parts.
Thanks for your feedback — I’m sorry to hear the product didn’t meet your expectations.
Many of our parts are 3D printed using high-quality, USA-made materials. This approach allows us to create unique designs while maintaining consistent quality and supporting domestic manufacturing.
That said, I understand it may not have matched what you were expecting.
If you’re open to it, I’d really appreciate the chance to make this right or hear more about what specifically fell short so we can improve.
The Striker Mini Mounta work perfect for our application.
About as easy of an install as you can get. Love the mat the unit can be easily removed when not needed without removing the brackets. The magnets are super strong. This puts the unit flush with the top of the rack and helps prevent damage from tree branches. The poly carbonate cover is worth it IMO. Extra protection from falling objects (acorns, walnuts, hail, etc.). Definitely recommend to others
Despite shipping issues I was very happy with the fitment and look of the piece. Super lucky I struggled to notice any defect
Perfect low profile design to protect my Starlink Mini while exploring the back country. Easy to remove when in camp and stays put when going down bumpy roads. Works great with the Trailrax roof rack.
I have the striker Starlink, mini roof mount with magnets and a shield upgrade kit installed. Both were easy to install and work perfectly. I attach it to the roof when I need the Starlink, even when moving. I haven’t had an issue yet. It’s the best!
We did a 17,500 mile round trip from Alaska to Florida last summer with our Chevy Silverado 2500 and Brinkley 5th wheel. I put the Starlink Mini on the roof of the truck with the magentic Striker mount and left it there for the entire trip. Worked perfectly the whole way up and back to power the Starlink 24/7. (A small Bluetti power station in the backseat powered it when the truck wasn't running). Never took the antenna off the roof. Never aimed the antenna -- and always has a good signal. You can't even see the Starlink up there when you are standing next to the truck, but I did get the Airtag option just in case it ever went missing. The Striker is quality stuff!
Our fire department operates in Northern Ontario, covering expansive area of small towns, wilderness, and highways in all weather conditions. We are moving to satellite internet based radio to overcome geographic challenges and needed a way to secure the dishes to vehicles in a reliable way that keeps them safe, working, and attached. We have had great experience when trialing Striker products, and are actively implementing these fleet-wide.
I had several questions and Bryan was really quick to respond and helped me figure out exactly what I needed for my application. I installed it last week and I’m super happy with how it works. Definitely recommend!
This is a great product with really good attention to the details. Very low profile as well. Also want to give a shout out to customer service. I received the wrong cable, initiated a chat on the website, they had the correct version shipped with a confirmation email in less than 5 minutes. Good company.
El título lo dice todo. Este es el mejor soporte Starlink mini que puedes conseguir, especialmente si tienes el portaequipajes Leitner. No hay ruido de viento, no hay resistencia, no hay riesgo de rayarlo con garajes, árboles o cualquier cosa colgando. Es absolutamente la única manera de asegurarse de que su Starlink no se mueva para que siempre pueda permanecer conectado sin importar a dónde vaya.
Tengo un Grenadier con el portaequipajes de 3/4 Leitner, y este soporte de techo fue muy fácil de instalar. He tenido el Starlink en mi camioneta durante los últimos cinco meses, y ha sido una forma fácil de agregar internet de alta velocidad en cualquier lugar. Recomendaría este soporte a cualquiera que tenga el portaequipajes Leitner y, por supuesto, un Grenadier.