ADARACAluminum Pro bed rack
DProprietaryCompatibility Guide
Find the right Starlink mount
for your roof rack.
Search your rack brand or model. We'll show you which Striker mount fits, what T-nut hardware to pair it with, and take you straight to the right product.
Not sure what you have? Measure the bar.
Most roof racks fall into one of four families. A tape measure gets you 90% of the way there.
-
A
Series 10 — 1" 80/20 extrusion
Aluminum crossbar built in 1" (or 25mm) increments — typically 1" × 2". T-slots on every side. The overland standard on Prinsu, Westcott, Sherpa, Flatline Van Co, and most vehicle-specific aftermarket racks.
-
B
Series 15 — 1.5" 80/20 extrusion
Aluminum crossbar built in 1.5" (or 40mm) increments — typically 1.5" × 3". T-slots on every side. Common on van and bed racks: TRUKD, Xtrusion, Orion ProMaster, current Unaka racks.
-
C
Aero T-track — teardrop or oval bar
Aluminum aero bar with a T-slot along the top, usually under a rubber strip. Thule WingBar / AeroBlade, Yakima JetStream / HD Bar, Rhino-Rack Vortex, INNO, Subaru factory bars.
-
D
Proprietary channel
The rack has a slot but it takes a brand-specific nut — Leitner ACS, Rhino Pioneer, Front Runner Slimline, Alu-Cab, ARB Base Rack, and others. Strikerfab mounts fit with the manufacturer's proprietary hardware.
Compatibility by rack
Filter by family below, or search above. Rows marked Verified are confirmed against manufacturer specs. Rows marked Likely match the standard by profile but haven't been physically tested by us or a customer yet — message us before ordering to confirm.
| Rack | Family |
Starlink Mini 80/20 (MNT-0100) Starlink STD 80/20 (MNT-0103) |
Starlink Mini — QuickR (MNT-0260) Starlink Mini — Static (MNT-0270) |
Hardware to use | Status |
|---|---|---|---|---|---|
| ADARACAluminum Pro bed rack | DProprietary | No fit | Fits1.5×1.5" outer size is NOT 15-series | ADARAC square nut (1/4" / 3/8" class) | Verified |
| Adrian SteelProfile HD Utility Rack | DProprietary | No fit | Contact us | Adrian Steel 5/16" square-head channel bolt | Likely |
| Alu-CabLoad bars / Modular / ModCAP | DProprietary | No fit | FitsEnd-slide only — remove end caps | Alu-Cab M8 hex-head channel bolt | Verified |
| ARBBase Rack | DProprietary | No fitDovetail channel — no T-nut fits directly | Fits | ARB official T-Slot Adaptor (SKU 1780230 pair or 1780220) | Verified |
| Backwoods Adventure ModsDRIFTR roof rack | DProprietary | No fit | Fits | Backwoods sliding T-nut — source from Backwoods | Verified |
| BillieBarsTruck bed rack crossbars | DProprietary | No fit | Fits | BillieBars M8 spring-loaded drop-in nut | Verified |
| Blueline SystemsChevy Avalanche Rack | BSeries 15 | Fits | Fits | MNT-0120-15-4 | Verified |
| Cali Raised LEDPremium Roof Rack + Overland Bed Rack | ASeries 10 | Fits | Fits | MNT-0120-10-4 | Verified |
| Eezi-AwnK9 platform | DProprietary | No fit | Fits | Standard 6mm bolt (hardware-store head) | Verified |
| Flatline Van CoLow Pro Roof Rack (Sprinter / Transit / ProMaster) | ASeries 10 | Fits | Fits | MNT-0120-10-4 | Verified |
| Ford / GM / Ram / Hyundai-Kia / Land Rover / VW-Audi-BMW-Mercedes (OEM)Factory aero crossbars | CAero T-track | No fit | Contact us | Typically Thule-family aero T-bolt — confirm per model | Likely |
| Front RunnerSlimline II tray / slats | DProprietary | No fit | FitsNarrower slot than Thule/Yakima — must use FR hardware | Front Runner M8 half-nut (aero T-bolts won’t seat) | Verified |
| Go RhinoSRM / Ceros (4-CORE) | DProprietary | No fit | Fits | 1/4" hex-head channel bolt (11.1mm across flats) | Verified |
| INNOAero Base (XB series) | CAero T-track | No fit | Fits | 20×20×4mm aero T-bolt | Verified |
| Ironman 4x4Atlas Roof Rack crossbars | DProprietary | No fit | Fits | Ironman Atlas twist-in spring nut | Verified |
| Jeep / Mopar (OEM)Multipurpose Roof Rack (JL / Gladiator hardtop) | CAero T-track | No fit | Contact us | Aero T-bolt — contact us to confirm before ordering | Likely |
| KB VoodooCXR / PRO-XE crossbars | DProprietary | No fit | Contact us | KB Voodoo drop-in fastener — contact us to confirm | Likely |
| KuatIBEX bed rack | DProprietary | No fit | Contact us | Kuat IBEX T-nut — confirm dims before ordering | Likely |
| Leitner DesignsACS bed rack load bars | DProprietary | Some variantsOnly bars with vertical channels — the -LT variants | Fits | LEI-0100-4 | Verified |
| Leitner DesignsACS Roof load bars | DProprietary | Some variantsBars with vertical channels only (-LT variants) | Fits | LEI-0100-4 | Verified |
| LFD Off RoadRuggedized Extrusion Crossbar | ASeries 10 | Fits | Fits | MNT-0120-10-4 | Verified |
| LFD Off RoadRuggedized Crossbar — steel | DProprietary | No fit | Fits | LFD plate-style channel nut (M8) | Verified |
| MaloneAirFlow2 | CAero T-track | No fit | Fits | Aero T-bolt (7/16" class) | Verified |
| Orion Van GearStealth Rack (Sprinter / Transit) | ASeries 10 | Fits | Fits | MNT-0120-10-4 | Verified |
| Orion Van GearProMaster Stealth Rack | BSeries 15 | Fits | FitsDo not use their Series 10 nut here | MNT-0120-15-4 | Verified |
| Owl VansLow Pro (Sprinter / Transit) | ASeries 10 | Fits | Fits | MNT-0120-10-4 | Verified |
| Prime DesignErgoRack | DProprietary | No fit | Contact us | Prime Design strip nut — verify crossbar channel | Likely |
| Prinsu (Original)Roof rack crossbars (non-Pro) | ASeries 10 | Fits | Fits | MNT-0120-10-4 | Verified |
| Prinsu ProPro Top Rack crossbars | DProprietary | Contact usCall to confirm compatibility | Contact usCall to confirm compatibility | Prinsu Pro channel nuts — source from Prinsu | Verified |
| PutcoVenture TEC bed rack | DProprietary | No fit | Contact us | Putco TEC square-nut kit — verify with mfr | Likely |
| Ranger DesignAluRack add-on crossbar | DProprietary | No fit | Contact us | Ranger AluRack strip nut | Likely |
| RCI OffroadRoof rack | ASeries 10 | Contact us | Contact us | MNT-0120-10-4 | Likely |
| RCI OffroadBed racks | BSeries 15 | Contact us | Contact us | MNT-0120-15-4 | Likely |
| Rhino-RackVortex aero bars | CAero T-track | No fit | Fits | 20×20×4mm aero T-bolt | Verified |
| Rhino-RackPioneer Platform (through Gen 5) | DProprietary | No fit | FitsStandard 20mm square T-bolt won’t work — needs Rhino’s specific head | Rhino Pioneer channel nut — elongated 35×20×4mm | Verified |
| Rhino-RackPioneer 6 | DProprietary | No fit | Fits | Zwifloc or TRC drop-in (M6) — channel ends are closed | Verified |
| Rhino-RackHeavy Duty (HD) bar | DProprietary | No fit | Fits | Rhino RR59TB channel nut (M8) | Verified |
| Rivian (OEM)R1T / R1S Cargo Crossbars | CAero T-track | No fit | Contact usReports mixed on which head thickness clears the channel | Narrow aero T-bolt — contact us before ordering | Likely |
| RolaSport Series | CAero T-track | No fit | Fits | Aero T-bolt (universal) | Verified |
| Sherpa Equipment CoPEAK & Sport Series roof racks | ASeries 10 | Fits | Fits | MNT-0120-10-4 | Verified |
| Sherpa Equipment CoPAK bed rack + load bars | ASeries 10 | Fits | Fits | MNT-0120-10-4 | Verified |
| Southern Style OffRoad (SSO)Tacoma / 4Runner roof rack | ASeries 10 | Contact us | Contact us | MNT-0120-10-4 | Likely |
| SportRackAero crossbars (Thule-made) | CAero T-track | No fitSquare-bar variants: no slot — see Family E | Fits | Thule-family aero T-bolt | Verified |
| Subaru (OEM)Aero crossbars (Crosstrek / Outback / Impreza) | CAero T-track | No fit | Fits | 20mm aero T-bolt (Thule-family) — expose channel by cutting rubber strip | Verified |
| TeraFlexNebo JL / JT / JK Roof Rack Cross Bar | ASeries 10 | Fits | FitsCenter aero track — contact us to confirm before publish | MNT-0120-10-4 | Verified |
| Tesla (OEM)Model Y Roof Rack | CAero T-track | No fit | Contact us | Aero T-bolt — dims unpublished, contact us | Likely |
| ThuleWingBar Evo | CAero T-track | No fitAero bars don’t have side channels | FitsAero T-bolt coming soon from Striker | 20×20×4mm square-head aero T-bolt (M6 or M8) | Verified |
| ThuleAeroBlade | CAero T-track | No fit | Fits | 20×20×4mm square-head aero T-bolt | Verified |
| ThuleProBar Evo | CAero T-track | No fit | Fits | 20×20×4mm square-head aero T-bolt | Verified |
| ThuleXsporter Pro / TracRac (truck) | CAero T-track | No fit | Fits | Thule T-slot hardware (M8) | Verified |
| TRUKDBed rack crossbars | BSeries 15 | Fits | Fits | MNT-0120-15-4 | Verified |
| Unaka Gear CoDIY roof rack components (customer builds) | ASeries 10 | FitsIdentify your bar series first | Fits | MNT-0120-10-4 | Verified |
| Unaka Gear CoCurrent premium roof racks (Transit / Sprinter) | BSeries 15 | Fits | Fits | MNT-0120-15-4 | Verified |
| upTOP OverlandBravo roof racks + TRUSS load bars | ASeries 10 | FitsKilo/adjustable bars are through-bolt — contact us | Fits | MNT-0120-10-4 | Verified |
| upTOP Overland15-series load bars | BSeries 15 | Fits | Fits | MNT-0120-15-4 | Verified |
| VantechH1 / H2 / H3 / J aero | DProprietary | No fit | Contact us | C-channel with rubber infill — contact us to verify | Likely |
| Victory 4x4Roof racks | ASeries 10 | Fits | Fits | MNT-0120-10-4 | Verified |
| Weather GuardAll-Purpose aluminum van rack | DProprietary | No fit | Contact us | No continuous channel documented — contact us | Likely |
| Westcott DesignsModular Roof Racks (Tacoma, 4Runner, GX, Lo-Pro) | ASeries 10 | Fits | Fits | MNT-0120-10-4 | Verified |
| Xtrusion OverlandXTR1 / XTR3 bed racks | BSeries 15 | FitsSome 10-series members in mixed builds | Fits | MNT-0120-15-4 | Verified |
| YakimaHD Bar (OverHaul HD / OutPost HD) | CAero T-track | No fit | Fits | 20×20×4mm aero T-bolt or Yakima slot nut | Verified |
| YakimaJetStream | CAero T-track | No fit | Fits | 20×20×4mm aero T-bolt or Yakima slot nut | Verified |
| YakimaLockNLoad platform | DProprietary | No fit | Fits | Yakima M8 flat square head ~19×19mm | Verified |
Adrian SteelProfile HD Utility Rack
DProprietary- Hardware to use
- Adrian Steel 5/16" square-head channel bolt
- Status
- Likely
Alu-CabLoad bars / Modular / ModCAP
DProprietaryARBBase Rack
DProprietaryBackwoods Adventure ModsDRIFTR roof rack
DProprietary- Hardware to use
- Backwoods sliding T-nut — source from Backwoods
- Status
- Verified
BillieBarsTruck bed rack crossbars
DProprietary- Hardware to use
- BillieBars M8 spring-loaded drop-in nut
- Status
- Verified
Blueline SystemsChevy Avalanche Rack
BSeries 15- Hardware to use
- MNT-0120-15-4
- Status
- Verified
Cali Raised LEDPremium Roof Rack + Overland Bed Rack
ASeries 10- Hardware to use
- MNT-0120-10-4
- Status
- Verified
Eezi-AwnK9 platform
DProprietary- Hardware to use
- Standard 6mm bolt (hardware-store head)
- Status
- Verified
Flatline Van CoLow Pro Roof Rack (Sprinter / Transit / ProMaster)
ASeries 10- Hardware to use
- MNT-0120-10-4
- Status
- Verified
Ford / GM / Ram / Hyundai-Kia / Land Rover / VW-Audi-BMW-Mercedes (OEM)Factory aero crossbars
CAero T-track- Hardware to use
- Typically Thule-family aero T-bolt — confirm per model
- Status
- Likely
Front RunnerSlimline II tray / slats
DProprietaryGo RhinoSRM / Ceros (4-CORE)
DProprietary- Hardware to use
- 1/4" hex-head channel bolt (11.1mm across flats)
- Status
- Verified
INNOAero Base (XB series)
CAero T-track- Hardware to use
- 20×20×4mm aero T-bolt
- Status
- Verified
Ironman 4x4Atlas Roof Rack crossbars
DProprietary- Hardware to use
- Ironman Atlas twist-in spring nut
- Status
- Verified
Jeep / Mopar (OEM)Multipurpose Roof Rack (JL / Gladiator hardtop)
CAero T-track- Hardware to use
- Aero T-bolt — contact us to confirm before ordering
- Status
- Likely
KB VoodooCXR / PRO-XE crossbars
DProprietary- Hardware to use
- KB Voodoo drop-in fastener — contact us to confirm
- Status
- Likely
KuatIBEX bed rack
DProprietary- Hardware to use
- Kuat IBEX T-nut — confirm dims before ordering
- Status
- Likely
Leitner DesignsACS bed rack load bars
DProprietary- Starlink Mini 80/20 (MNT-0100)
Starlink STD 80/20 (MNT-0103) - Some variantsOnly bars with vertical channels — the -LT variants
- Hardware to use
- LEI-0100-4
- Status
- Verified
Leitner DesignsACS Roof load bars
DProprietary- Starlink Mini 80/20 (MNT-0100)
Starlink STD 80/20 (MNT-0103) - Some variantsBars with vertical channels only (-LT variants)
- Hardware to use
- LEI-0100-4
- Status
- Verified
LFD Off RoadRuggedized Extrusion Crossbar
ASeries 10- Hardware to use
- MNT-0120-10-4
- Status
- Verified
LFD Off RoadRuggedized Crossbar — steel
DProprietary- Hardware to use
- LFD plate-style channel nut (M8)
- Status
- Verified
MaloneAirFlow2
CAero T-track- Hardware to use
- Aero T-bolt (7/16" class)
- Status
- Verified
Orion Van GearStealth Rack (Sprinter / Transit)
ASeries 10- Hardware to use
- MNT-0120-10-4
- Status
- Verified
Orion Van GearProMaster Stealth Rack
BSeries 15- Starlink Mini — QuickR (MNT-0260)
Starlink Mini — Static (MNT-0270) - FitsDo not use their Series 10 nut here
- Hardware to use
- MNT-0120-15-4
- Status
- Verified
Owl VansLow Pro (Sprinter / Transit)
ASeries 10- Hardware to use
- MNT-0120-10-4
- Status
- Verified
Prime DesignErgoRack
DProprietary- Hardware to use
- Prime Design strip nut — verify crossbar channel
- Status
- Likely
Prinsu (Original)Roof rack crossbars (non-Pro)
ASeries 10- Hardware to use
- MNT-0120-10-4
- Status
- Verified
Prinsu ProPro Top Rack crossbars
DProprietaryPutcoVenture TEC bed rack
DProprietary- Hardware to use
- Putco TEC square-nut kit — verify with mfr
- Status
- Likely
Ranger DesignAluRack add-on crossbar
DProprietary- Hardware to use
- Ranger AluRack strip nut
- Status
- Likely
RCI OffroadRoof rack
ASeries 10- Hardware to use
- MNT-0120-10-4
- Status
- Likely
RCI OffroadBed racks
BSeries 15- Hardware to use
- MNT-0120-15-4
- Status
- Likely
Rhino-RackVortex aero bars
CAero T-track- Hardware to use
- 20×20×4mm aero T-bolt
- Status
- Verified
Rhino-RackPioneer Platform (through Gen 5)
DProprietaryRhino-RackPioneer 6
DProprietary- Hardware to use
- Zwifloc or TRC drop-in (M6) — channel ends are closed
- Status
- Verified
Rhino-RackHeavy Duty (HD) bar
DProprietary- Hardware to use
- Rhino RR59TB channel nut (M8)
- Status
- Verified
Rivian (OEM)R1T / R1S Cargo Crossbars
CAero T-trackRolaSport Series
CAero T-track- Hardware to use
- Aero T-bolt (universal)
- Status
- Verified
Sherpa Equipment CoPEAK & Sport Series roof racks
ASeries 10- Hardware to use
- MNT-0120-10-4
- Status
- Verified
Sherpa Equipment CoPAK bed rack + load bars
ASeries 10- Hardware to use
- MNT-0120-10-4
- Status
- Verified
Southern Style OffRoad (SSO)Tacoma / 4Runner roof rack
ASeries 10- Hardware to use
- MNT-0120-10-4
- Status
- Likely
SportRackAero crossbars (Thule-made)
CAero T-trackSubaru (OEM)Aero crossbars (Crosstrek / Outback / Impreza)
CAero T-track- Hardware to use
- 20mm aero T-bolt (Thule-family) — expose channel by cutting rubber strip
- Status
- Verified
TeraFlexNebo JL / JT / JK Roof Rack Cross Bar
ASeries 10- Starlink Mini — QuickR (MNT-0260)
Starlink Mini — Static (MNT-0270) - FitsCenter aero track — contact us to confirm before publish
- Hardware to use
- MNT-0120-10-4
- Status
- Verified
Tesla (OEM)Model Y Roof Rack
CAero T-track- Hardware to use
- Aero T-bolt — dims unpublished, contact us
- Status
- Likely
ThuleWingBar Evo
CAero T-trackThuleAeroBlade
CAero T-track- Hardware to use
- 20×20×4mm square-head aero T-bolt
- Status
- Verified
ThuleProBar Evo
CAero T-track- Hardware to use
- 20×20×4mm square-head aero T-bolt
- Status
- Verified
ThuleXsporter Pro / TracRac (truck)
CAero T-track- Hardware to use
- Thule T-slot hardware (M8)
- Status
- Verified
TRUKDBed rack crossbars
BSeries 15- Hardware to use
- MNT-0120-15-4
- Status
- Verified
Unaka Gear CoDIY roof rack components (customer builds)
ASeries 10- Hardware to use
- MNT-0120-10-4
- Status
- Verified
Unaka Gear CoCurrent premium roof racks (Transit / Sprinter)
BSeries 15- Hardware to use
- MNT-0120-15-4
- Status
- Verified
upTOP OverlandBravo roof racks + TRUSS load bars
ASeries 10- Starlink Mini 80/20 (MNT-0100)
Starlink STD 80/20 (MNT-0103) - FitsKilo/adjustable bars are through-bolt — contact us
- Hardware to use
- MNT-0120-10-4
- Status
- Verified
upTOP Overland15-series load bars
BSeries 15- Hardware to use
- MNT-0120-15-4
- Status
- Verified
VantechH1 / H2 / H3 / J aero
DProprietary- Hardware to use
- C-channel with rubber infill — contact us to verify
- Status
- Likely
Victory 4x4Roof racks
ASeries 10- Hardware to use
- MNT-0120-10-4
- Status
- Verified
Weather GuardAll-Purpose aluminum van rack
DProprietary- Hardware to use
- No continuous channel documented — contact us
- Status
- Likely
Westcott DesignsModular Roof Racks (Tacoma, 4Runner, GX, Lo-Pro)
ASeries 10- Hardware to use
- MNT-0120-10-4
- Status
- Verified
Xtrusion OverlandXTR1 / XTR3 bed racks
BSeries 15- Starlink Mini 80/20 (MNT-0100)
Starlink STD 80/20 (MNT-0103) - FitsSome 10-series members in mixed builds
- Hardware to use
- MNT-0120-15-4
- Status
- Verified
YakimaHD Bar (OverHaul HD / OutPost HD)
CAero T-track- Hardware to use
- 20×20×4mm aero T-bolt or Yakima slot nut
- Status
- Verified
YakimaJetStream
CAero T-track- Hardware to use
- 20×20×4mm aero T-bolt or Yakima slot nut
- Status
- Verified
YakimaLockNLoad platform
DProprietary- Hardware to use
- Yakima M8 flat square head ~19×19mm
- Status
- Verified
No match in our list. That doesn't mean it won't fit — reach out and we'll help you figure it out.
Don't see your rack? Not sure if it will fit?
Send us a photo of your bar or the model number and we'll tell you exactly what works before you buy.
Contact us here →