Awesome mount. This is designed for a long term mounting. The only thing I would add is a wing nut screws for a quick short term mounting, where I was 4x4 ing and wanted to remove the starlink to a camping situation and visa verse.
I attached this mount to the roof of my big rig cab using the magnet method. I reach speeds up to 75 mph at times, running on the rough roads of southern California and northern Arizona almost daily and haven't had any movement. Its aligned perfectly and works perfectly on my routes, specifically on US 93 between Phoenix and the NV-UT line at I-80 where the dish didn't work well using the windshield mount method. This mount is a must have for truckers and travelers.
Replaced original cords that were flimsy, and did not last
When mounted on a roof rack the Starlink is not visible.
This mount installed easily and is as advertised. I am very satisfied with the product. I would like to see one thing changed with the design, if possible. I would like the polycarbonate to be flush with the top of the rails. That would allow gear to slide over or be temporarily carried over the top of the antenna.
I purchased one for Starlink Gen3 antenna. Delivery was fast. It is very well designed and was easy to install on 4040 aluminum extrusion. I hope it lasts long without beeaking on my long and rough trip to Alaska next month.
This was everything I needed out of a star link roof mount at a fraction of the cost of most others on the market. Fit my Prinsu rack perfect and holds the dish secure, no worries about it flying off driving down the highway or on rough trails. 10/10 definitely recommend!
The Striker Mount for the Starlink Mini paired with the Low Profile Launch Pad is an absolute home run. The build quality is rock‑solid, the fitment is precise, and the whole setup feels purpose‑built for real overland use. Installation is clean and confidence‑inspiring, and once mounted, the Mini sits secure, streamlined, and completely out of the way. Performance is flawless — zero vibration, zero fuss, just reliable connectivity wherever you park. This is hands‑down one of the smartest upgrades you can make if you rely on Starlink in the field.
For the money I was expecting something better than a 3D printed parts.
Thanks for your feedback — I’m sorry to hear the product didn’t meet your expectations.
Many of our parts are 3D printed using high-quality, USA-made materials. This approach allows us to create unique designs while maintaining consistent quality and supporting domestic manufacturing.
That said, I understand it may not have matched what you were expecting.
If you’re open to it, I’d really appreciate the chance to make this right or hear more about what specifically fell short so we can improve.
The Striker Mini Mounta work perfect for our application.
About as easy of an install as you can get. Love the mat the unit can be easily removed when not needed without removing the brackets. The magnets are super strong. This puts the unit flush with the top of the rack and helps prevent damage from tree branches. The poly carbonate cover is worth it IMO. Extra protection from falling objects (acorns, walnuts, hail, etc.). Definitely recommend to others
Despite shipping issues I was very happy with the fitment and look of the piece. Super lucky I struggled to notice any defect
Perfect low profile design to protect my Starlink Mini while exploring the back country. Easy to remove when in camp and stays put when going down bumpy roads. Works great with the Trailrax roof rack.
I have the striker Starlink, mini roof mount with magnets and a shield upgrade kit installed. Both were easy to install and work perfectly. I attach it to the roof when I need the Starlink, even when moving. I haven’t had an issue yet. It’s the best!
We did a 17,500 mile round trip from Alaska to Florida last summer with our Chevy Silverado 2500 and Brinkley 5th wheel. I put the Starlink Mini on the roof of the truck with the magentic Striker mount and left it there for the entire trip. Worked perfectly the whole way up and back to power the Starlink 24/7. (A small Bluetti power station in the backseat powered it when the truck wasn't running). Never took the antenna off the roof. Never aimed the antenna -- and always has a good signal. You can't even see the Starlink up there when you are standing next to the truck, but I did get the Airtag option just in case it ever went missing. The Striker is quality stuff!
Our fire department operates in Northern Ontario, covering expansive area of small towns, wilderness, and highways in all weather conditions. We are moving to satellite internet based radio to overcome geographic challenges and needed a way to secure the dishes to vehicles in a reliable way that keeps them safe, working, and attached. We have had great experience when trialing Striker products, and are actively implementing these fleet-wide.
I had several questions and Bryan was really quick to respond and helped me figure out exactly what I needed for my application. I installed it last week and I’m super happy with how it works. Definitely recommend!
This is a great product with really good attention to the details. Very low profile as well. Also want to give a shout out to customer service. I received the wrong cable, initiated a chat on the website, they had the correct version shipped with a confirmation email in less than 5 minutes. Good company.
Perfect fabrication! Strong Magnets! Fast Shipping! Very pleased!!! Thanks
This mount is exactly as presented. The only reason I didn't give it a 5 star is because I was under the impression that the bottom aluminum plate and side mounting brackets were powder coated black. On the website it doesn't show that it's black nor is it mentioned in its description. So my impression of it being powder coated is solely MY disillusion. This mount is perhaps the lowest profile mount on the market. It's robust and does what's advertised. It is truly a very universal and easily modifiable mount for whatever your application. The price is reasonable and fair for what you get. I just wished that there would be an option to purchase the side mounting brackets, powder coated. However, that shouldn't and wouldn't be a deal breaker.
Thank you for the feedback. We are working out the details on powdercoating and it will be available as an option on our site in a few weeks.
Title says it all. This is the best Starlink mini mount you can get, especially if you have the leitner rack. There is no wind noise, no drag, no risk of scraping it on garages or trees or anything low hanging. Absolutely the only way to go when it comes to knowing you’re Starlink isn’t going anywhere to ensure you can always stay connected no matter where you roam.
I have a Grenadier with the Leitner 3/4 roof rack, and this roof mount was very easy to install. I've had the starlink on my truck for the past five months, and it has been an easy way to add high speed internet anywhere.I'd recommend this mount to anyone with the Leitner roof rack, and a Grenadier of course.