Striker Fabrication
Toma de CC para Starlink Mini
Toma de CC para Starlink Mini
SKU:MNT-0075
Add Accessories
No se pudo cargar la disponibilidad de retiro
Una toma de corriente de 12 V CC resistente a la intemperie que puede montar en casi cualquier lugar, lo que le brinda a su Starlink Mini un punto de conexión de alimentación limpio y permanente. Ideal para instalaciones en furgonetas, vehículos recreativos y barcos donde desea una alimentación ordenada e integrada.
Características
- Toma de corriente de 12 V CC resistente a la intemperie para Starlink Mini
- Se monta a ras en la mayoría de las superficies planas
- Punto de conexión de alimentación limpio y permanente
- Instalación sencilla
Materiales y construcción
- Carcasa de ASA
- Cable de 18 AWG
- Contactos resistentes a la corrosión
Especificaciones de instalación
- Tamaño del orificio: 1.75"
- Espacio libre trasero: 1.5" detrás de la superficie de montaje
Por qué elegir Striker
- Materiales de alta calidad diseñados para condiciones adversas
- Diseños innovadores y modulares
- Completamente ensamblado y listo para usar
- Hecho en EE. UU.
Garantía: 1 año de garantía
Share

The outlet was clean and sturdy it fits snugly into the hole I cut into side of the rig..
The only credit center so I have is the plugging in and removing the starting cable is a little bit tight a little bit too tight because I'm afraid it's going to pull the plug right out of the rig.
Considering using some kind of lubrication on the plug so it's not so tight
Hi Daniel, Thank you for the review and for the detailed feedback.
The fitment shouldn't be that tight, so we'd like to take a look at this. We'll reach out directly to get it sorted out for you.
Bryan
******
Following up: We dug into this and found the issue wasn't a tight fit. The weather seal was creating suction inside the outlet, which is what made the plug so hard to pull out.
We've updated the design with a couple of very small vent holes on the inside of the part. That eliminates the suction while keeping the weather tight seal intact.
An updated part is on its way to you. Thanks again for the detailed feedback, it led directly to a better product.
Bryan