Striker Fabrication
Prise CC Starlink Mini
Prise CC Starlink Mini
SKU:MNT-0075
Add Accessories
Impossible de charger la disponibilité du service de retrait
Une prise 12 V CC étanche que vous pouvez monter presque partout, offrant à votre Starlink Mini un point de connexion d'alimentation propre et permanent. Idéal pour les installations en van, camping-car et bateau où vous souhaitez une alimentation intégrée et soignée.
Caractéristiques
- Prise 12 V CC étanche pour le Starlink Mini
- Montage encastré sur la plupart des surfaces planes
- Point de connexion d'alimentation propre et permanent
- Installation simple
Matériaux et construction
- Boîtier en ASA
- Fil de 18 AWG
- Contacts résistants à la corrosion
Spécifications d'installation
- Taille du trou : 1,75"
- Dégagement arrière : 1,5" derrière la surface de montage
Pourquoi choisir Striker
- Matériaux de haute qualité conçus pour des conditions difficiles
- Conceptions modulaires innovantes
- Entièrement assemblé et prêt à l'emploi
- Fabriqué aux États-Unis
Garantie : 1 an
Share

The outlet was clean and sturdy it fits snugly into the hole I cut into side of the rig..
The only credit center so I have is the plugging in and removing the starting cable is a little bit tight a little bit too tight because I'm afraid it's going to pull the plug right out of the rig.
Considering using some kind of lubrication on the plug so it's not so tight
Hi Daniel, Thank you for the review and for the detailed feedback.
The fitment shouldn't be that tight, so we'd like to take a look at this. We'll reach out directly to get it sorted out for you.
Bryan
******
Following up: We dug into this and found the issue wasn't a tight fit. The weather seal was creating suction inside the outlet, which is what made the plug so hard to pull out.
We've updated the design with a couple of very small vent holes on the inside of the part. That eliminates the suction while keeping the weather tight seal intact.
An updated part is on its way to you. Thanks again for the detailed feedback, it led directly to a better product.
Bryan