Title says it all.
We detect no loss in signal, and the polycarbonate is engineered to fit perfectly. One suggestion: make sure that you ask how to retro-fit (if not ordering it with the original mount) the corners with the screws - we had to make some small modifications to the corners to have them fit over the cover correctly. Once again though - this is really well-designed, well manufactured stuff!
Thank you, William! No modifications should be necessary to fit the polycarbonate cover.
We have a video here that outlines the install: https://youtu.be/Pw6Lp5jYVzU
One note about the video: We redesigned the corners in late september and the longer screws and the foam pads are no longer needed.
Everything bolted right up to my Prinsu Roof Rack and sits perfectly. I had Starlink up and running at 200MB speed while driving down the road in a no cell service area in less than an hour.
Love the unit ! You can see the pads on the back end cover on F150 for travel, then plop it on the raised window of the airstream while camping ! We also use it on out rooftop carriers on the subaru, top off the roof of a honda accord that still has a steel roof, and finally on top of the Bronco roof with more magnetic pads! Amazing cover !
Strikerfab is a Gold Standard Company, if you need help, there to do just that, help. I reached out several times and was able to get all my questions answered right away. Their products are absolutely impeccable and fit, form and function are precise. I would definitely recommend Striker Fab
Well designed easy to put together. I just installed it yesterday and it looks great. It is installed on a 2018 Tacoma.
This is not just another mass-produced innovation! When you see the high-quality craftsmanship and innovation that goes in to putting this brushed aluminum bracket together with the magnet mounts - I'm installing mine with the magnet-grabbing discs to glue on to my fiberglass roof - you'll realize that you stepped up to a worthy piece of equipment.
Well made, perfect fit. I got it with polycarbonate shield, very strong and coated magnets and handle and it came fully assembled. I drilled a few holes for more permanent mounting on the roof rack. I left a note with the order and received a call to address the comments very quickly. Great customer service!
Great product. Great fit on rhino rack pioneer platform
Well designed and made. Hard to find something like this for mounting mini to a flat surface.
The fit of these products is perfect. Super strong and well made.
Great product. Fits a need for my Starlink Mini. Works great with my roof. Solid and looks fantastic!
Well built. Great materials and pricing. Whenever a client wants a Mini on their adventure van build, this is what we offer them.
These adapters are great to attach the suction cups when mounting inside the vehicle on a glass roof. They are simple, rugged and don't add much weight. Like all Striker gear they have no sharp edges, align perfectly with the perimeter holes and can be mounted on the sides or front and rear. This might be important when trying to match the spacing of a rail. There is a low-profile version as well so think through what you intend to do or do what I did and talk with Bryan to better fit your application.
This deflector is beefy, has a precision fit and provides indestructible protection. I have the Airtag tracker behind it and its a good fit. A simple well designed and executed must have accessory if you mount the mini outside on a rooftop or rack. Striker is an excellent company and is always there to advise.
These are very high-quality marine grade suction cups that will hold about 125lbs. They are popular in the overlanding and marine communities because of the build quality. Very easy to operate and totally reliable way to mount inside a glass topped vehicle (mine goes in a Tesla Model 3). Bryan advised me on the proper mounting method to get a perfect spacing away from the glass and it is rock solid when attached. I routed a dedicated power cable inside the liner and that makes taking the kit in and out a lot easier. These are worth the price.
Needed to figure out the mounting solution for my Leitner ACS Grenadier rack. Spoke with Striker and they got it figured out. Super low profile and very easy to put together and get our Starlink Mini going! Highly recommend not just for the quality of the product but also the service and communication.
Incredible strong magnets! Actually it takes a bit of effort to take the unit off the magnets, making me feel good that the unit will never accidentally fall off !
Pleasantly surprised with the quality. The nylock nuts, uv resistant plastics, stainless steel bolts. I ended up adding some extra magnets just for extra holding power. Time will tell how it holds up but I’m pleased with the purchase. Fast shipping and great communication with questions.
I mounted a Starlink Mini on 1515 crossbars using the Striker Fab mount with the protective shield. Worked perfectly. Seems very solid and it was super easy. Brian was super helpful when I called with questions. Great company.
PERFECT FOR MY MINI OUTBACK AUSTRALIA
Great for outback Australia