I had originally placed an order for a competitor's product shortly before seeing the Striker Mount and immediately knew I'd made the wrong decision. So I canceled the order which was moments before being picked up by FedEx and placed an order for the Striker Mount. So glad I did because this is perfect. The Striker Mount fits perfectly, I mean PERFECTLY to the Mini. As I placed the unit into the mount, there was a moment it wouldn't fit due to it being at an angle, that's how close the tolerance is. Straightened it up and gently nudged it in. No slop whatsoever. All metal support as the nuts are hidden within the 3D printed plastic, such a smart design decision!

The entire device is a great example of solid and well-though-out design. Simple is strong, nothing extraneous. Everything is protected and slim, making for the perfect way of protecting the Mini. Not much more to add. If you have a Mini, get this for it. Then put it in a backpack, or on your car roof, or dashboard and shoot through the windshield. Smart design.

You might ask about the Milwaukee battery in the photo. Found an adapter that allows the Mini to be powered by them. If you're like me and use Milwaukee tools and have a bunch of batteries, get one to go along with the Striker Mount for the ultimate in portability.

While many/most people are going with Starlink Mini for their RVs/vans these days, I chose to go with the standard Gen 3, for a few reasons. 1) it fit PERFECTLY next to my MaxxFan. I figured with additional surface area, when I'm somewhere crowded with others using Starlink, I would get better coverage. I got some 80/20 to span my roof, put yet another penetration in it ( :( , but necessary), & voila! Great design & fit, & high quality. Extremely pleased & would highly recommend to someone with a similar setup! (I've got a '23 Sprinter 2500)

Item is rock solid and arrived quickly. Online video made it easy to install.

I’ve been using the strike mount with handle and polycarbonate shield for about a month in some of the harshest conditions I can put it through. The magnets have been more than strong enough to keep the unit attached and I have been driving through some thick overgrown dirt roads as well as high speed interstates. I live in an extremely hot area as well. All in all the point is easy to throw up, easy to take down if I leave the vehicle unattended and has done a fantastic job at protecting the Starlink. I did add the bug guard on as well, very easy install. Signal strength seems to be unaffected by the shield for what it’s worth. I have. Installed this same set up on other emergency response vehicles as welll utilizing the steel plates with adhesive, worked flawlessly! I love how simple it is to switch between vehicles, throw it into a utv, or just use it running off AC. This is a fantastic mounting/protection system - I highly recommend it.

Everything bolted right up to my Prinsu Roof Rack and sits perfectly. I had Starlink up and running at 200MB speed while driving down the road in a no cell service area in less than an hour.

Love the unit ! You can see the pads on the back end cover on F150 for travel, then plop it on the raised window of the airstream while camping ! We also use it on out rooftop carriers on the subaru, top off the roof of a honda accord that still has a steel roof, and finally on top of the Bronco roof with more magnetic pads! Amazing cover !

Strikerfab is a Gold Standard Company, if you need help, there to do just that, help. I reached out several times and was able to get all my questions answered right away. Their products are absolutely impeccable and fit, form and function are precise. I would definitely recommend Striker Fab

Well made, perfect fit. I got it with polycarbonate shield, very strong and coated magnets and handle and it came fully assembled. I drilled a few holes for more permanent mounting on the roof rack. I left a note with the order and received a call to address the comments very quickly. Great customer service!

Great product. Great fit on rhino rack pioneer platform

Needed to figure out the mounting solution for my Leitner ACS Grenadier rack. Spoke with Striker and they got it figured out. Super low profile and very easy to put together and get our Starlink Mini going! Highly recommend not just for the quality of the product but also the service and communication.

Pleasantly surprised with the quality. The nylock nuts, uv resistant plastics, stainless steel bolts. I ended up adding some extra magnets just for extra holding power. Time will tell how it holds up but I’m pleased with the purchase. Fast shipping and great communication with questions.

I mounted a Starlink Mini on 1515 crossbars using the Striker Fab mount with the protective shield. Worked perfectly. Seems very solid and it was super easy. Brian was super helpful when I called with questions. Great company.

Great product for my use , in & out of different vehicles daily " DOWN UNDER IN AUSTRALIA "
I drive outback town to town deliver vehicle & fly home it suits me I put on roof i take off & in my carry bag to airport

Very quick shipment and quick response by the seller. Bought this mount because I wanted to save some money and I don't mind if it has some small non-perfections. Bought it with the magnet mounts. Arrived quickly within a few days to EU. Few scratches on the metal plate only, really nothing big. Should work perfect for me. Was def. worth for me saving some 30 bucks, happy with this! Magnets are very strong, I am not worried about this falling off my car :)

Thank you striker installed in minutes and very competitive priced