Starlink Roof Rack Compatibility Guide
Compatibility Guide
Find the right Starlink mount
for your roof rack.
Search your rack brand or model. We'll show you which Striker mount fits, what T-nut hardware to pair it with, and take you straight to the right product.
Not sure what you have? Measure the bar.
Most roof racks fall into one of five families. A tape measure gets you 90% of the way there.
-
A
Series 10 — 1" 80/20 extrusion
Aluminum crossbar built in 1" (or 25mm) increments — typically 1" × 2". T-slots on every side. The overland standard on Prinsu, Westcott, Sherpa, Flatline Van Co, and most vehicle-specific aftermarket racks.
-
B
Series 15 — 1.5" 80/20 extrusion
Aluminum crossbar built in 1.5" (or 40mm) increments — typically 1.5" × 3". T-slots on every side. Common on van and bed racks: TRUKD, Xtrusion, Orion ProMaster, current Unaka racks.
-
C
Aero T-track — teardrop or oval bar
Aluminum aero bar with a T-slot along the top, usually under a rubber strip. Thule WingBar / AeroBlade, Yakima JetStream / HD Bar, Rhino-Rack Vortex, INNO, Subaru factory bars.
-
D
Proprietary channel
The rack has a slot but it takes a brand-specific nut — Leitner ACS, Rhino Pioneer, Front Runner Slimline, Alu-Cab, ARB Base Rack, and others. Strikerfab mounts fit with the manufacturer's proprietary hardware.
Compatibility by rack
Filter by family below, or search above. Rows marked Verified are confirmed against manufacturer specs. Rows marked Likely match the standard by profile but haven't been physically tested by us or a customer yet — message us before ordering to confirm.
| Rack | Family |
Starlink Mini 80/20 (MNT-0100) Starlink STD 80/20 (MNT-0103) |
Starlink Mini — QuickR (MNT-0260) Starlink Mini — Static (MNT-0270) |
Hardware to use | Status |
|---|
No match in our list. That doesn't mean it won't fit — reach out and we'll help you figure it out.
Don't see your rack? Not sure if it will fit?
Send us a photo of your bar or the model number and we'll tell you exactly what works before you buy.
Contact us here →